Skip to content

GPS ringfencing setup: how to set up geofencing in ShiftTracker

How to set up GPS ringfencing (geofencing) in ShiftTracker: radius limits, Enforce Location For, Warn or Block, and a live test before go-live.

TW
Travis Wright

Content Lead

Published

11 Nov 2026

Updated

20 Nov 2026

Read

5 min

Man in a beret and hi-vis vest looks at a mobile phone in a yard before a closed metal gate in low golden light.Company News

Key takeaway

Switch geofencing on per site, set the location and radius in metres, and choose which actions it checks: Check Calls, Book On or Book Off. Start with Warn, read the breaches for a week, then move to Block. Test from inside and outside the fence on the phones your staff use before you rely on it.

Setting up a geofence in ShiftTracker takes four decisions: whether to switch it on for a site, where the fence sits and how wide it is, which actions it checks, and whether a breach only warns or actually blocks. GPS ringfencing is the same feature, called geofencing in the product. A geofence is a circle drawn from a latitude, longitude and radius, set per site. A site can run without one. Where a fence is on, ShiftTracker compares the phone's location with the circle when the action happens and records the distance. Warn logs the breach and lets the action go through. Block refuses it. Most sites should start on Warn, read the breaches for a week, then move to Block once the radius is right.

What is a geofence in ShiftTracker, and when does it apply?

A geofence is a circle around a site, set by a centre point and a radius in metres. It applies only to the actions you choose: Check Calls, Book On and Book Off. A site with no geofence is not checked against a circle. The fence is a check at the moment of each action, not continuous tracking.

Location is sent with the action. The Check Calls board can open View check-call location, which shows where each call was made against the site.

Where do you set the fence, and what limits apply?

An Admin switches geofencing on under the site's Settings tab, or as one step in the New Site wizard. Set the location with Set from Address or on the map, enter the radius in metres (up to 1,000 m in the wizard, or up to 30,000 m on the Settings tab), then choose the actions and the violation action.

The New Site wizard on its first step, with a rail across the top listing Site Details, Contact, Geofencing and Coverage

The New Site wizard, where geofencing is one step after Contact. Settings can change it later.

Latitude and Longitude start at the centre of the site's postcode. Auto-detect from address places them on the address instead. Check the pin on the map before you save, because a postcode centre may not sit on the building itself. Create your first site sets out each step of the wizard.

A site page open on the Settings tab, with the site card on the left and the Settings jump links, including Geofencing, on the right

A site's Settings tab, where the geofence is changed after the site exists.

Which actions does the fence check, and what happens on a breach?

Under Enforce Location For, choose Check Calls, Book On or Book Off. Then set the Violation Action. Warn logs the breach and allows the action. Block prevents it, and the phone shows the distance and the allowed radius. Start with Warn on any new site.

Agency officers are the exception. For them the geofence is recorded and never enforced, even at a site set to Block. Their check call is logged with the distance attached.

A site that requires GPS has a separate rule. If the pattern requires GPS and the phone gives no location fix, the check call is refused outright. Tell staff this before go-live.

What do staff need on their phones?

Location access must be on for the app or browser, and staff should book on and off on the phones they carry. Location is switched on only where the site is geofenced or the pattern asks for GPS. When it is, the screen shows a Geofence Active or Geofence Enforced badge.

The app and the web page run the same rules, so the same refusals apply on both. The button wording differs between them, but the windows, PIN and geofence checks are identical. GPS accuracy varies by device and surroundings, so test with the handsets your staff actually use.

How do you test a fence before you rely on it?

Run a live test from inside and outside the radius, on the phones staff use. A call inside should show as inside, and a call outside should record a breach. Only then move the site from Warn to Block, and only after the test has passed on every handset.

  1. Stand inside the radius and log a check call while an Admin has the Check Calls board open.

  2. Press View check-call location and confirm the call sits inside the fence.

  3. Stand outside the radius and log a second call.

  4. Confirm the breach is recorded. If the site is set to Block, confirm the action is refused.

  5. Repeat for Book On and Book Off if you enforce those too.

What does a geofence not do?

A geofence does not track people between actions, does not stop an agency officer from logging a check call, and does not place a call to anyone. A missed check call alerts your control room until someone acknowledges it, but no call is placed to the worker. Location is kept at the moments you enforce it.

Retention matters too. ShiftTracker removes the GPS position recorded with each check call after three years, except on an emergency. The distance from the site and the inside or outside result are kept with the check-call record. The check-call log is kept for 74 months in every organisation. See workforce, data retention and white label settings.

What do the breach messages tell staff?

When a geofence or GPS rule stops an action, staff see a plain message on the phone. Some messages give the distance and the allowed radius. Read each one against the site's settings before you assume the phone is at fault.

Message on the phoneWhat it meansWhat to doYou are outside the allowed area for this site. You are 250m away (allowed: 100m).The site is geofenced and set to Block.Move to the site. If the site only warns, the action goes through and the distance is recorded.Location is required for check calls at this site. Please enable location access.The pattern requires GPS and the browser or phone gave no location.Allow location for the site and try again.

These are the examples given in the documentation. Check the wording on your own handsets. Log each breach you see during the Warn period, because those are the cases a Block setting would have refused.

What to do next

Switch geofencing on for one site on Warn, run the five-step test above on the phones your staff use, and move the site to Block once the radius is right.

Frequently asked questions

Is geofencing on by default?
No. Geofencing is off until an Admin switches it on for a site, either in the New Site wizard or on the site's Settings tab.
What is the difference between Warn and Block?
Warn logs the breach with the distance from the site and lets the action go through. Block refuses the action and shows the officer how far away they are and the allowed radius.
Does ShiftTracker track staff between check calls?
No. Location is checked only at the moment of an action you enforce, such as a check call, book-on or book-off. There is no continuous tracking.
Does geofencing apply to agency officers?
Their location is recorded with the distance from the site and an Outside the site area alert is shown, but a breach never blocks an agency officer, even at a site set to Block.
How long is check-call location kept?
The GPS position recorded with each check call is removed after three years, except on an emergency. The distance from the site, the inside or outside result and the check-call log itself are kept for 74 months.

Sources

  1. Create your first site
  2. Book on and off in the app
  3. Book on and off a shift
  4. Monitor check calls
  5. Workforce, data retention and white label settings
TagsSecurityTraining
ShareLinkedInX (Twitter)

Stop managing shifts. Start covering them.

See ShiftTracker on your own rota — a 30-minute demo, no slide deck, just the product.